The result file (*.gdr) is opened in the Result Viewer after the computation is finished.

As an example, we analyze a 3D model of a structure with a side length of 1500 µm (1.5 mm) in Z-direction (2000 voxels, voxel length of 0.75 µm). To analyze the structure, we use the settings shown below.

Results - Report

In the Layer analysis section, the SVP of the entire structure is reported. Below are the analysis results of the chosen directions. In this example, the Z-direction was selected as through direction, therefore, a Z direction analysis section is contained in the report. Initially, the specific solid volume and the specific pore volume are reported.

Following this, a table displays computed values from the thickness estimation algorithm for the selected fits. The first three rows showcase the thickness of the identified inlet, medium, and outlet, with their cumulative sum equating to the domain size in the Z-direction. The fourth row provides the SVP of the identified medium. The nodes correspond to the piecewise linear approximations that are illustrated in the thickness estimation input dialog, which indicate the coordinate in the through direction and the corresponding SVP. The final row shows the error of the SVP approximation in the L2 norm. Below the table, the chosen thickness SVP threshold is reported.

In the context menu shown on the left, the Fit Selection can be modified and executed as a post-processing step. Additionally, computations can be repeated with a different Thickness SVP Threshold value. Click Apply… to update the Report, the Plots, and the corresponding results Map.

Results - Plots

In the Plots tab, the SVP distribution corresponding to the layers of the through direction, their piecewise linear approximation, and the estimated medium thickness are visualized under the Approximation subtab for each selected fit. If exactly two fits are selected, two stacked plots will be displayed for comparison purposes. Otherwise, if three or more fits are chosen, you can select the plot you wish to view from the pull-down menu.

Furthermore, under the Material subtab, plots of the SVP of all existing materials are shown:

Under the Material ID subtab, plots of the SVP of the different materials IDs are shown. The plots differ only from those in the Material subtab if several Material IDs are assigned to the same material.

Results - Map

In the Map tab, the information from the Reports and Plots tab is available as Key : Value Map.