Warp (and Weft) Pitch is the distance between the center lines of two adjacent warp (or weft) threads. This corresponds to the sum of the aperture and the thread width. The aperture is equal to the pore space between two consecutive threads. It is not explicitly entered in the dialog, but implicitly defined by the warp (or weft) pitch. The thread width is specified in the Threads tab of the dialog. The warp (or weft) threads touch if the entered pitch is equal to the width of the warp (or weft) thread.

The warp pitch and weft pitch can also be entered as Warp Meshes per Inch or Warp Meshes per cm and Weft Meshes per Inch or Weft Meshes per cm. This is equivalent to the number of threads of warp or weft per inch or cm in the structure. These values are changed automatically when modifying the values for Warp Pitch or Weft Pitch, and vice versa.

The amount of overlap that the threads show at their crossing points is determined by the amount of Vertical Thread Overlap. Negative values can be used to enforce distance. The overlap, corresponding to the entered value of vertical overlap, is shown blue in the figure below (for the chosen color settings for warp and weft). The thread overlap has no physical equivalent, but it is helpful to simulate the deformation of threads at their touching points.

The Crimp Factor defines the straightness of the warp and weft threads. It varies between -1 and 1. A value of 1 for the Crimp Factor results in straight weft threads, which is equal to the weave type Reverse Dutch Weave. A value of -1 results in straight warp threads, which is equal to the weave type Dutch Weave.

When the crimp factor is set to 0, both thread types are bent around each other, leading to a thinner structure in Z-direction. Consequently, for the weave types Dutch Weave and Reverse Dutch Weave, the Crimp Factor cannot be changed. For the weave type Regular, the Crimp Factor allows to model all possible gradations between the extremes Dutch Weave and Reverse Dutch Weave.

Warp and Weft Broadening are the widening of the threads at the crossing points of weft and warp threads. This simulates the bending and deformation of the threads during the weaving process. Values of broadening vary between 0 (no broadening) and 1 (maximum broadening). This means the new thread width is between 100% and 200% of the original thread width. When Dutch Weave is chosen, the Warp Broadening is fixed to 0, because the corresponding threads are straight and do not deform. Analogously, for Reverse Dutch Weave the Weft Broadening is fixed to 0.

Random Seed initializes the random number generator behind the structure generator. Changing its value produces different sequences of random numbers and hence, different realizations of the specified structure. If all settings are equal, generating with the same Random Seed value produces exactly the same structure. The Random Seed is a non-negative integer number. It affects the structure generation, if for example Random Multifil threads are used and Weft/Warp Lateral Deformation is applied (as for the warp thread in the example below). For twill weave and satin weave, the realization of other parameters is also influenced by the chosen random seed. This is mentioned when the corresponding parameter is explained.

The option to choose the Thread Shift is only available when choosing Dutch Weave or Reverse Dutch Weave. With the default value of 0, the weft threads (or warp threads, in case of Reverse Dutch Weave) run perpendicular to the warp (or weft) threads. When choosing a value of -1 or 1, they run diagonally.